Underside part

S30 ｱ ﾙ ﾐ ｶ ｰ ﾎ ﾞ ﾝ ｽ ﾄ ﾗ ｯ ﾄ ﾊ ﾞ ｰ ｵ ｰ ﾊ ﾞ ﾙ ｼ ｬ ﾌ ﾄ diameter: Width 40�o thickness 20�o ﾌ ﾛ ﾝ ﾄ $202 ﾘ ｱ $202 You hold down the flexion of the ﾎ ﾞ ﾃ ﾞ ｨ ｰ which occurs at the time of the ｺ ｰ ﾅ ﾘ ﾝ ｸ ﾞ substantially and are packed. The ｸ ｵ ﾘ ﾃ ｨ which pursues functionality and the ﾌ ｧ ｯ ｼ ｮ ﾝ characteristic which are superior.

Pyro upper, height adjustment kit

Pyro upper mount Model Type Year system ﾌ ﾛ ﾝ ﾄ ﾘ ｱ ﾀ ｲ ﾌ ﾟ Price ﾀ ｲ ﾌ ﾟ Price ﾌ ｪ ｱ ﾚ ﾃ ﾞ ｨ Z S30 and S31 S44,10 - S53,10 Fixing \25,000 Fixing \25,000 S30 and S31 S44,10 - S53,10 Adjustment \25,000 Adjustment \25,000 S130 S53,10 - S58,9 Adjustment \25,000 Fixing \25,000 ｽ ｶ ｲ ﾗ ｲ ﾝ GC10 S43,8 - S47,9 Adjustment \25,000 - - GC110 S47,9 - S52,8 Adjustment \25,000 - - GC210 S52,9 - S56,7 Adjustment \25,000 Fixing \25,000 DR30 and HR30 S56,8 - S60,8 Adjustment \25,000 Fixing \25,000 ﾌ ﾞ ﾙ ｰ ﾊ ﾞ ｰ ﾄ ﾞ P510 - Adjustment \25,000 - - * The ﾋ ﾟ ﾛ ﾅ ｯ ﾄ at the time of ﾋ ﾟ ﾛ ｱ ｯ ﾊ ﾟ ｰ order (the ﾄ ﾖ ﾀ ﾅ ｯ ﾄ) modification is free. * ｷ ｬ ﾝ ﾊ ﾞ ｰ adjustment fine can adjust adjustment system optionally with the ｽ ﾗ ｲ ﾄ ﾞ ﾌ ﾟ ﾚ ｰ ﾄ. * The adjustment system for S30 is the ｾ ﾝ ﾀ ｰ 5�o ｵ ﾌ ｾ ｯ ﾄ ﾀ ｲ ﾌ ﾟ. Pyro upper single item part Pyro nut Pyro color A Pyro color B Pyro ball ｻ ｲ ｽ ﾞ Value case ﾆ ｯ ｻ ﾝ system M12×P1.25 \1,500 ﾄ ﾖ ﾀ system M14×P1.5 \1,500 ｻ ｲ ｽ ﾞ Value case Hole diameter 12 φ height 12�o \1,500 Hole diameter 12 φ height 22�o \1,500 The component of S130, GC210 and R30 ﾘ ｱ ﾋ ﾟ ﾛ ｱ ｯ ﾊ ﾟ ｰ. Without the ﾋ ﾟ ﾛ height pitch is installed in the ﾘ ｱ, the time necessity. Price \1,500 Single item ﾊ ﾟ ｰ ﾂ for ｵ ｰ ﾊ ﾞ ｰ ﾎ ｰ ﾙ of ﾋ ﾟ ﾛ ｱ ｯ ﾊ ﾟ ｰ ﾏ ｳ ﾝ ﾄ Price \5,000 Height adjustment kit One touch type (welding unnecessary) Welding type (for 55 φ ｽ ﾄ ﾗ ｯ ﾄ) Strut short process type *It scrapes-off the saucer of the genuine ﾊ ﾞ ﾈ, the ｱ ｼ ﾞ ｬ ｽ ﾀ ｰ it just is covered can use. * It scrapes-off the saucer of the genuine ﾊ ﾞ ﾈ, covers the ｱ ｼ ﾞ ｬ ｽ ﾀ ｰ and welds. * When lowering the height, the bottom piercing which becomes problem can be prevented and the ｼ ｮ ｳ ｰ ﾄ ｽ ﾄ ﾗ ｯ ﾄ completes simply. (ｼ ｮ ｰ ﾄ ｼ ｮ ｯ ｸ selling separately)* welding is necessary. Value case 2 these SET \45,000 Value case 2 these SET \45,000 Value case 2 these SET \45,000 Adaptation model(for 51 φ ｽ ﾄ ﾗ ｯ ﾄ) S30 (- 49,10) ﾌ ﾛ ﾝ ﾄ, ﾘ ｱ S130 ﾌ ﾛ ﾝ ﾄ, ﾘ ｱ GC10, GC110 ﾌ ﾛ ﾝ ﾄ GC210, R30 ﾌ ﾛ ﾝ ﾄ, ﾘ ｱ In addition Adaptation model S30 (49,11 -) ﾌ ﾛ ﾝ ﾄ, ﾘ ｱ In addition Adaptation model(for 51 φ ｽ ﾄ ﾗ ｯ ﾄ) S30 (- 49,10) ﾌ ﾛ ﾝ ﾄ, ﾘ ｱ S130 ﾌ ﾛ ﾝ ﾄ GC10, GC110 ﾌ ﾛ ﾝ ﾄ GC210, R30 ﾌ ﾛ ﾝ ﾄ In addition * As for S130, G210 and the R30 ﾘ ｱ 45 φ 51 it is φ depending upon the thickness of the ｼ ｮ ｯ ｸ. Height adjustment single item part Height pitch adjuster Upper seat Lower seat Lock seat Height pitch wrench ﾀ ｲ ﾌ ﾟ Inside diameter (φ) Price (1) ﾜ ﾝ ﾀ ｯ ﾁ 51 \6,000 ﾜ ﾝ ﾀ ｯ ﾁ 45 \6,000 熔 connection 56 \6,000 For ｼ ｮ ｰ ﾄ processing 51 \6,000 ﾀ ｲ ﾌ ﾟ Model Price (1) ﾌ ﾛ ﾝ ﾄ The for NISSANｼ ｮ ｯ ｸ \5,000 ﾌ ﾛ ﾝ ﾄ For ﾄ ﾖ ﾀ ｼ ｮ ｯ ｸ \5,000 ﾘ ｱ S30 and for S31 \5,000 ﾘ ｱ S130, GC210, R30 \5,000 ﾊ ﾞ ﾈ inside diameter ﾀ ｲ ﾌ ﾟ Price (1) 63φ ﾌ ﾛ ﾝ ﾄ \3,500 75φ ﾘ ｱ \3,500 * When ordering use The ｱ ｼ ﾞ ｬ ｽ ﾀ ｰ clearly writing. Value case \3,000 * When ordering use The ｱ ｼ ﾞ ｬ ｽ ﾀ ｰ clearly writing. ｻ ｲ ｽ ﾞ Price (1) Small \1,900 Large \1,900 * In ﾌ ﾛ ﾝ ﾄ small 2 necessity! ! In ﾘ ｱ small 1 large 1 necessity! ! Series-wound coming spring single item for height adjustment - ｽ ﾌ ﾟ ﾘ ﾝ ｸ ﾞ for ﾌ ﾛ ﾝ ﾄ (ID63/ inside diameter 63 φ) 1 \7,000 - ｽ ﾌ ﾟ ﾘ ﾝ ｸ ﾞ for ﾘ ｱ (ID75/ inside diameter 75 φ) 1 \7,000 - ﾍ ﾙ ﾊ ﾟ ｰ ｽ ﾌ ﾟ ﾘ ﾝ ｸ ﾞ (total length 100�o) * Play of the ﾊ ﾞ ﾈ at the time of the ｼ ﾞ ｬ ｯ ｷ ｱ ｯ ﾌ ﾟ is prevented. (ID63/ inside diameter 63 φ) 1 \12,000 (ID75/ inside diameter 75 φ) 1 \12,000 ﾊ ﾞ ﾈ ﾚ ｰ ﾄ ﾌ ﾛ ﾝ ﾄ (inside diameter 63 φ) ﾘ ｱ (inside diameter 75 φ) Free length Classified by color Free length Classified by color K4.0 200/250 - 250 Red K5.0 215 White 240 White K6.0 210 Yellow 230 Yellow K7.0 205 ﾋ ﾟ ﾝ ｸ 220 ﾋ ﾟ ﾝ ｸ K8.0 200 Green 200/250 - K9.0 195 Purple 200/250 - K10.0 195 Blue 200/250 - K110 200/250 - 200/250 - K12.0 200/250 - 200/250 - K13.0 200/250 - 200/250 - K14.0 200/250 - 200/250 -

 

Height adjustment set

Heightpitchset for AE86 rear - The shock absorber - it is not included in set price. - The shock absorber -, the TRD AE831 shock (XXYEN 15,000-/1 the book) use. - It is the ID63 series-wound coming suspension attaching. * 4K - To 12K please select from midst of 1K flying 9 types. * The muffler is under the diff.. Trade item name Spring rate Value case AE86 rear height pitch set 4K - To 12K please select from 1K flying 9 types. \59,000 * The shock absorber which is the picture - it is not included in set. Series-wound spring (the for below-mentioned adjuster) Spring rate (Kg/�o) Spring inside diameter 74 Φ 63 Φ Type ｽ ﾀ ﾝ ﾀ ﾞ ｰ ﾄ ﾞ Long �T �U Free length (mm) 3.5 - - 180 - 4 220 - 200 170 4.5 220 260 - - 5 220 260 200 170 6 210 260 215 170 7 205 260 215 170 8 202 260 215 170 9 199 - 215 170 10 196 - - 170 12 195 - - 170 Price \7,000 \7,000 \8,000 \8,000 As for series-wound suspension because the SAE steel is used, former strengthening suspension such as durability, high-speed stability and cornering efficiency it is the spring which shows the travelling efficiency which is different. Height adjustment adjuster type �T - Welding installation type Shaving the spring seat of strut, welding, you install. Trade item name Manufacturer Upper seat sizeselection Shell case size selection Spring inside diameter selection Set price Height adjustment adjuster type �T NISSAN 22 Φ, 20 Φ, 10.5 Φ 45 Φ, 51 Φ, 55 Φ 74 Φ, 63 Φ \20,000 Toyota 14 Φ * The upper seat of the adjuster are times when with the shock and pyro upper and so on relationship processing and the spacer become necessary. Height adjustment adjuster type �U - All aluminum alumite processing being completed wheel stopper volt/bolt attaching Welding unnecessary type Processing the ring nut and the spring seat, you install. Trade item name Manufacturer Upper seat sizeselection Shell case size selection Spring inside diameter selection Set price Height adjustment adjuster type �U NISSAN 22 Φ, 20 Φ, 10.5 Φ 45 Φ, 51 Φ 74 Φ, 63 Φ \32,000 Toyota 14 Φ * The upper seat of the adjuster are times when with the shock and pyro upper and so on relationship processing and the spacer become necessary.

For competition vehicle inspection corresponding ｻ ｽ ﾍ ﾟ ﾝ ｼ ｮ ﾝ

Car species name Before Vehicle inspection correspondingsuspension Suspension for competition(the ﾊ ﾞ ﾈ you play) Type After ﾚ ｰ ﾄ Height 2 price ﾚ ｰ ﾄ Height 2 price Fair ready Z ･ latter term in ･ before S30/31 F 5.0kg -4cm \23,000 6.0kg -5cm \18,000 R 4.2kg -2cm \23,000 6.0kg -3cm \18,000 Fair ready Z S130 prior-term ･ latter term F 5.0kg -4cm \24,000 6.0kg -5cm \19,000 R 4.2kg -2cm \23,000 5.0kg -2cm \18,000 ｽ ｶ ｲ ﾗ ｲ ﾝ GC10, KGC10 F 5.0kg -3cm \24,000 6.0kg -4cm \19,000 R 14.0kg -2cm \24,000 19.5kg -3cm \21,000 ｽ ｶ ｲ ﾗ ｲ ﾝ GC210,211 F 5.0kg -4cm \23,000 - - - R 4.2kg -3.5cm \24,000 - - - ｽ ｶ ｲ ﾗ ｲ ﾝ HR30, DR30 F 5.0kg -4.5cm \24,000 - - - R 4.2kg -2cm \23,000 - - - ｶ ﾛ ｰ ﾗ ､ ｽ ﾌ ﾟ ﾘ ﾝ ﾀ ｰ AE86 F 5.0kg -2cm \20,000 - - - R 4.2kg -2cm \20,000 - - -

Shock absorber -

* In vehicle inspection free ticket! Land Transport Bureau bureau register end
Model Year system Type GS ﾊ ｰ ﾄ ﾞ ｱ ｼ ﾞ ｬ ｽ ﾀ ﾌ ﾞ ﾙ ｽ ﾄ ﾘ ｰ ﾄ ﾌ ﾛ ﾝ ﾄ ﾘ ｱ ﾌ ﾛ ﾝ ﾄ ﾘ ｱ ﾌ ﾛ ﾝ ﾄ ﾘ ｱ ﾌ ｪ ｱ ﾚ ﾃ ﾞ ｨ Z S44/10 - 49/09 S30 240Z 432Z \14,800 \14,800 \20,400 - \10,500 \10,500 S48/10 - 49/09 GS30 (2/2) \14,800 \14,800 \20,400 - \10,500 \10,500 S49/10 - 53/10 S30,31-GS30,31 \14,800 \14,800 \20,400 - \10,500 \10,500 S53/10 - 56/01 S130-GS130 \14,800 \13,800 \18,700 \15,400 \10,500 \8,900 S56/02 - 58/09 S130-GS130 \14,800 \13,800 \18,700 \16,800 \10,500 \8,900 ｽ ｶ ｲ ﾗ ｲ ﾝ S43/08 - 52/08 GC and KGC10/110 \14,800 \11,800 \18,700 \12,900 \10,500 \7,600 S52/09 - 56/07 GC210-GC211 \14,800 \13,800 \18,700 \15,400 \10,500 \8,900 S56/08 - 60/08 HR30-DR30 \14,800 \11,800 \18,700 \15,400 \10,500 \8,900 ｶ ﾛ ｰ ﾗ ｽ ﾌ ﾟ ﾘ ﾝ ﾀ ｰ S47/03 - 49/03 TE27 - - \18,700 - \10,000 - S54/06 - 58/05 TE70-TE71 - - \22,000 \15,000 \10,000 \7,000 S58/05 - 62/05 AE86 - - \22,000 \15,000 \10,000 \7,000 ｾ ﾘ ｶ S45/12 - 50/09 TA22-RA25 - - - \15,000 \10,000 \7,000

Strengthening urethane bush

1, ﾛ ｱ ｱ ｰ ﾑ ﾌ ﾞ ｯ ｼ ｭ ｾ ｯ ﾄ 2, ﾃ ﾝ ｼ ｮ ﾝ ﾛ ｯ ﾄ ﾞ ﾌ ﾞ ｯ ｼ ｭ SET 3 - 6, ﾌ ﾛ ﾝ ﾄ/ﾘ ｱ ｽ ﾀ ﾋ ﾞ ﾌ ﾞ ｯ ｼ ｭ / ｽ ﾀ ﾋ ﾞ ﾘ ﾝ ｸ SET 7, ﾘ ｱ ｺ ﾝ ﾄ ﾛ ｰ ﾙ ｱ ｰ ﾑ ﾌ ﾞ ｯ ｼ ｭ SET 8, ﾐ ｯ ｼ ｮ ﾝ ｸ ﾛ ｽ ﾒ ﾝ ﾊ ﾞ ｰ ﾌ ﾞ ｯ ｼ ｭ SET 9, ﾃ ﾞ ﾌ ｷ ｬ ﾘ ｱ ﾌ ﾞ ｯ ｼ ｭ SET 10, ｳ ﾚ ﾀ ﾝ ｽ ﾃ ｱ ﾘ ﾝ ｸ ﾞ ﾀ ﾞ ﾝ ﾊ ﾟ ｰ 11, ﾗ ｯ ｸ ｱ ﾝ ﾄ ﾞ ﾋ ﾟ ﾆ ｵ ﾝ ﾌ ﾞ ｯ ｼ ｭ SET 12, ﾌ ﾛ ﾝ ﾄ ｼ ｮ ｯ ｸ ﾊ ﾞ ﾝ ﾌ ﾟ ｽ ﾄ ｯ ﾌ ﾟ SET * ﾌ ﾞ ｯ ｼ ｭ diameter other than describing in case of desire consultation. * Being to be times when the picture and the actual commodity differ description above, depending upon model acknowledgement.

* Note! There are some where every ｶ ﾗ ｰ just the ｺ ﾞ ﾑ of the thing and in are pulled out burns pulling out the genuine ｺ ﾞ ﾑ ﾌ ﾞ ｯ ｼ ｭ of the pressing in ﾀ ｲ ﾌ ﾟ, with the fire with the ﾌ ﾟ ﾚ ｽ and takes. ｳ ﾚ ﾀ ﾝ ﾌ ﾞ ｯ ｼ ｭ diameter after the verifying, please choose the method of pulling out.

Number Trade item name S30/31 S130 GC10 GC110 GC210 R30 510 - 810 ï½¾ ﾘ ｶ, ｶ ï¾› ï½° ï¾— 1 Lower arm bush SET \8,000 \8,000 \8,000 \8,000 \8,000 - C) \8,000 \8,000 2 Tension rod bush SET \9,000 \9,000 \9,000 \9,000 \9,000 \9,000 \9,000 A) \9,000 3 Front stubby bush SET \4,000 \4,000 \6,000 \4,000 \4,000 \4,000 \4,000 - 4 Front stubby link SET \8,000 \8,000 \8,000 \8,000 \8,000 \8,000 \8,000 \8,000 5 リアスタビブッシ�… ET \4,000 \4,000 - - \4,000 \4,000 - - 6 リアスタビリンク SET \8,000 \8,000 - - \8,000 \8,000 - - 7 Rear rocker arm bush SET \25,000 \14,000 \14,000 \14,000 \14,000 \14,000 \14,000 B) \25,000 8 Mission cross member bush SET \4,000 \4,000 \5,000 - \5,000 \5,000 - - 9 Diff. carrier bush SET \12,000 - - - - \15,000 \15,000 - 10 Urethane steering wheel damper \6,000 D) \6,000 - - - - \6,000 - 11 ラックアンドピ two オンブッシ�… SET E) \6,000 - - - - - - - 12 Front shock bump stop SET \4,000 \4,000 \4,000 \4,000 \4,000 \4,000 \4,000 \4,000

* ｾ ﾘ ｶ S45 - S60 year, the ｶ ﾛ ｰ ﾗ (the ｽ ﾌ ﾟ ﾘ ﾝ ﾀ ｰ) it conforms to the S45 - S61 year car! A) ｾ ﾘ ｶ S50,10 - S53 and the ｶ ﾛ ｰ ﾗ (the ｽ ﾌ ﾟ ﾘ ﾝ ﾀ -) it conforms to the S50 - S54 year car. As for the ｾ ﾘ ｶ S45 - S50,9 car there is setting of the custom-made item \13,000. B) Only the ｾ ﾘ ｶ S46 - S51 year car installs, yes. C) The ﾌ ﾞ ﾙ - only ﾊ ﾞ ｰ ﾄ ﾞ 510 installs, yes. D) You install the ﾊ ﾟ ﾜ ｽ ﾃ car of S130, failure. E) S30 (- S49,9) with (S49,10 -) there are 2 types. * Note! The case of order, please clearly write year system/type in detail.

K 2 brake pad

K 2 brake pad Model Year system Type Front Rear Item turn ｱ ｽ ﾍ ﾞ ｽ ﾄ -B Item turn ﾉ ﾝ ｱ ｽ -Z Item turn ｱ ｽ ﾍ ﾞ ｽ ﾄ -B Item turn ﾉ ﾝ ｱ ｽ -Z ﾌ ｪ ｱ ﾚ ﾃ ﾞ ｨ Z S44/10 - 53/10 S30,31 GS30,31 K25B \15,000 K25Z \21,000 - - - (ﾗ ｲ ﾆ ﾝ ｸ ﾞ) \12,000 S44/10 - 53/10 S30,31 (MK63/4 ﾎ ﾟ ｯ ﾄ) KA5B \18,000 KA5Z \23,000 - - - - S53/10 - 56/10 S130 GS130 K81B \17,000 K81Z \22,000 37AB \16,000 37AZ \21,000 S56/10 - 58/09 S130 GS130 K81B \17,000 K81Z \22,000 106B \15,000 106Z \21,000 S58/09 - H1/07 Z31 130B \16,000 130Z \22,000 106B \15,000 106Z \21,000 H1/07 - Z32 301B \18,000 301Z \22,000 302B \17,000 302Z \22,000 ｽ ｶ ｲ ﾗ ｲ ﾝ S43/08 - 52/08 GC and KGC10/110 K25B \15,000 K25Z \21,000 - - - (ﾗ ｲ ﾆ ﾝ ｸ ﾞ) \12,000 S43/08 - 52/08 GC system (MK63/4 ﾎ ﾟ ｯ ﾄ) KA5B \18,000 KA5Z \23,000 - - - - S52/09 - 53/07 GC210 K25B \15,000 K25Z \21,000 - - - (ﾗ ｲ ﾆ ﾝ ｸ ﾞ) \12,000 S53/08 - 56/07 GC211 K25B \15,000 K25Z \21,000 37AB \16,000 37AZ \21,000 S56/08 - 60/07 HR/DR30 (RS ﾀ ｰ ﾎ ﾞ removal) K88B \16,000 K88Z \22,000 106B \15,000 106Z \21,000 S58/02 - 60/08 DR30 130B \16,000 130Z \22,000 106B \15,000 106Z \21,000 S60/08 - H1/05 R31 130B \16,000 130Z \22,000 - - - - H1/08 - BNR32 GT-R 301B \18,000 301Z \22,000 302B \17,000 302Z \22,000 ｼ ﾙ ﾋ ﾞ ｱ,180 H3/01 - PS13 ﾀ ｰ ﾎ ﾞ, RPS13 286B \16,000 286Z \22,000 106B \15,000 106Z \21,000 H5/08 - S14 ﾀ ｰ ﾎ ﾞ Ks 301B \18,000 301Z \22,000 106B \15,000 106Z \21,000 ﾚ ﾋ ﾞ ﾝ, ﾄ ﾚ ﾉ S44/09 - 54/02 TE27 - 60 K72B \17,000 K72Z \22,000 - - - - S58/05 - 62/05 AE86 102B \16,000 102Z \22,000 126B \16,000 126Z \21,000 ｾ ﾘ ｶ S45/12 - 56/06 TA (RA) 22 - 47 K72B \17,000 K72Z \22,000 - - - -

* Because it can produce also the model other than describing, please inquire.

篠 axial 爵 discarding explanation/releasing shaku snipe 柴 losing wicked recognition 蔀 Kit Lacquer snipe copying explanation/releasing snipe moisture 爵 losing serviing wine 勺 losing wicked recognition 蔀 Kit L ｷ ｿﾍ ﾑ ｡ﾊ discarding wicked axial clinoaxis snipe 勺 ｡｢ 偲 serviing wine ear lacquer losing ｡ﾟ 2 ｡｢ 叱 copying serviing wine snipe Set ｡ﾋ \139,000 ｡� lacquer borrowing snipe discarding serviing wine ｡� pardon serviing wine 竺 borrowing 爵 losing serviing wine SET \4,170 ｻ ﾅ ﾍ ﾍ ｡ｧ discarding wicked axial clinoaxis snipe 勺 ｷ � ｷ ﾚ ﾎ ﾌ actual axial discarding explanation/releasing ｰ ｵ ﾃ 衾 ﾏ /980Kg 偲 serviing wine ear lacquer losing ｷ ﾂ /184 ｦ ﾕ ﾁ ｴ ﾂ ﾎ ｽ ﾅ ﾎ ﾌ /9.3Kg ﾂ ﾐ ｱ � ﾇ ﾏ ﾎ ﾏ /400PS L ｷ ｿ, FJ20 ﾍ ﾑ ｡ﾊ discarding wicked axial clinoaxis snipe 勺 ｡｢ 偲 serviing wine ear lacquer losing ｡｢ 叱 copying serviing wine snipe ｡｢ lacquer borrowing snipe discarding serviing wine ｡｢ pardon serviing wine 竺 borrowing 爵 losing serviing wine ﾉ ﾕ ｡ﾋ \109,800 ｻ ﾅ ﾍ ﾍ ｡ｧ discarding wicked axial clinoaxis snipe 勺 ｷ � ｷ ﾚ ﾎ ﾌ actual axial discarding explanation/releasing 竺 勺 corporation ｷ ﾚ ﾎ ﾌ ｺ � ､ � ｽ ﾐ ､ ｷ 叱 copying serviing wine snipe ｰ ｵ ﾃ 衾 ﾏ /1200Kg 偲 serviing wine ear lacquer losing ｷ ﾂ /225 ｦ ﾕ ﾁ ｴ ﾂ ﾎ ｽ ﾅ ﾎ ﾌ /10.2Kg ﾂ ﾐ ｱ � ﾇ ﾏ ﾎ ﾏ /380PS

PARTS ｡｡LIST ｡｡｡ﾊ seven snipe copying serviing wine snipe slanted snipe 勺 ﾍ ﾑ ｡ﾋ ｡ｽ ｾ ｦ ﾉ ﾊ ﾌ ｾ 篠 axis 爵 TypeA Moisture 爵 losing serviing wine 勺 1 Discarding wicked axial clinoaxis snipe 勺 ｡ﾊ STD ｡ﾋ \45,000 \52,000 2 Discarding wicked axial clinoaxis snipe 勺 ｡ﾊ ｷ � ｷ ﾚ ﾎ ﾌ ﾉ ﾊ ｡ﾋ \51,000 \58,000 3 Losing wicked recognition 蔀 偲 serviing wine ear lacquer losing ｡｡｡｡1 ﾋ � \22,000 \30,000 ｡ｽ ｾ ｦ ﾉ ﾊ ﾌ ｾ 篠 axis 爵 TypeA Moisture 爵 losing serviing wine 勺 4 疾 爵 Actual snipe discarding explanation/releasing shaku snipe 柴 \10,000 ｡ｽ 5 Discarding explanation/releasing shaku recognition moisture 汐 snipe discarding explanation/releasing shaku snipe 柴 \20,000 \23,500 6 Losing wicked recognition 蔀 叱 copying serviing wine snipe \25,000 \37,000

ﾄ ｶ ｷ ﾚ ﾎ ﾌ losing 杓 thanking/apologizing borrowing discarding wicked axial clinoaxis snipe 勺 ｡�std actual axial discarding explanation/releasing ｡｡\40,000 ｡�R actual axial discarding explanation/releasing ｡｡｡｡｡｡\44,000 ｢ ｣ ｺ 狆 ﾁ ｡｡losing 杓 snipe gossamer thanking/apologizing borrowing discarding serviing wine 偲 serviing wine 爵 SCM435 ｢ ｣ ﾉ ｽ ﾌ ﾌ ﾇ ｮ ｽ 靉 � ｡｡actual discarding 柴 wicked axial 柴 serviing wine Losing 杓 thanking/apologizing borrowing discarding wicked axial clinoaxis snipe 勺 ､ ﾏ ｡｢ ﾂ ﾑ ｵ ﾗ ﾀ ｭ ､ ﾋ ﾍ ･ ､ � ､ ｿSCM ｺ 爨 � ｺ ﾎ ﾍ ﾑ ､ ｷ ｽ wing ｵ ｲ ﾃ ｹ ｩ ､ ﾇ ､ ﾏ ､ ﾊ ､ ｷ ､ ｨ ､ ﾊ ､ ､ ｷ ﾚ ﾎ ﾌ ｲ ｽ ､ ﾈ ﾂ ﾑ ｵ ﾗ ﾀ ｭ ､ � ﾎ ｾ ﾎ ｩ ､ ｷ ､ ﾞ ､ ｷ ､ ｿ｡｣ shaku lacquer slanted explanation/releasing 爵 lacquer ､ ﾏ 竺 losing 疾 勺 灼 snipe losing ､ ﾋ ﾉ ﾒ ｴ ｶ ､ ﾋ ﾈ ｿｱ � ､ ｷ ﾁ � ､ 熙 ﾎ ｸ ﾂ ｳ ｦ ﾅ ﾀ ､ � ｳ ﾎ ｼ ﾂ ､ ﾋ ｹ 筅 皃 ﾆ ､ ｯ ､ � ､ ﾞ ､ ｹ ｡｣ ｡�std actual axial discarding explanation/releasing ､ ﾏ drop 爵 moisture serviing wine 爵 ､ ﾎ ﾄ 翊 ｮ 柴 勺 losing ､ ﾎ ｱ ﾆ ｶ ﾁ ､ ﾎ ｾ ｯ ､ ﾊ ､ ､ lacquer 柴 borrowing snipe 柴 actual axial discarding explanation/releasing ､ ﾇ ､ ｹ ｡｣ ｡�R actual axial discarding explanation/releasing ､ ﾏ STD ､ ﾋ ｹ ｹ ､ ﾋ ｷ � ｷ ﾚ ﾎ ﾌ ､ � ﾄ ﾉ ｲ ﾃ ､ ｷ ､ ｿcopying axial shaku lacquer slanted explanation/releasing 爵 lacquer ｻ ﾅ ﾍ ﾍ ､ ﾇ ､ ｹ ｡｣ ｡ｽ Drop 爵 moisture serviing wine 爵 ｷ ｿｼ ｰ STD ｡ﾊ kg ｡ﾋ R actual axial discarding explanation/releasing ｡ﾊ kg ｡ﾋ ﾆ � ｻ ｺ L20 ｡ﾁ L28 4.8 4.3 L18 4.6 4.3 FJ20DE 4.8 4.2 FJ20ET 5.9 4.4 A12, A14 3.5 2.7 SR20DET 5.4 ｡ｽ RB26DETT 5.8 ｡ｽ ｡ｽ Drop 爵 moisture serviing wine 爵 ｷ ｿｼ ｰ STD ｡ﾊ kg ｡ﾋ R actual axial discarding explanation/releasing ｡ﾊ kg ｡ﾋ 柴 snake truth 2TG 4.4 3.7 18RG 4.4 ｡ｽ 4K 3.9 2.5 4AG ｡ﾊ AE86 ｡ﾋ 3.9 3.7 4AG ｡ﾊ AE92/NA ｡ﾋ 4.6 ｡ｽ 2E/2ET 3.8 2.8 3SG 4.6 3.6 Losing wicked recognition 蔀 叱 copying serviing wine snipe ｡� 偲 serviing wine ear lacquer losing ｡�L ｷ ｿlosing wicked recognition 蔀 slanted snipe losing ｡｡｡｡ﾆ � ｸ � ､ ｬ 1 ｭ ﾐ ｸ � ､ ､ ｶ ｯ ｲ ｽ actual axial discarding explanation/releasing ｡｡\4,500 ｡�L ｷ ｿｶ ｯ ｲ ｽ actual axial discarding explanation/releasing discarding wicked axial clinoaxis snipe 勺 slanted serviing wine 勺 柴 ｡｡｡｡ｽ wing ｵ ､ ﾎ 10% ｶ ｯ ｲ ｽ actual axial discarding explanation/releasing ｡｡6 ﾋ ﾜ SET \1.800 ｡�lacquer borrowing snipe discarding serviing wine ｡� pardon serviing wine 竺 borrowing 爵 losing serviing wine SET｡｡｡｡ \3,370 ｡�L ｷ ｿｶ ｯ ｲ ｽ losing wicked recognition 蔀 叱 copying serviing wine snipe ｡｡｡｡ｰ ｵ ﾃ 衾 ﾏ ｡ｧ 750kg ｡｡NISMO/ ｵ ｵ ﾍ ｭ ﾀ ｽ ､ ｢ ､ � \28,000 ｡�L ｷ ｿperson actual 勺 losing wicked recognition 蔀 偲 serviing wine ear lacquer losing ｡｡｡｡NISMO ﾀ ｽ \27,000 ﾂ 醢 ﾆ ﾎ ﾌ shaku borrowing snipe lacquer serviing wine moisture borrowing 爵 actual serviing wine snipe ｡ﾌ ﾆ ﾃ ﾄ ｧ ｡ﾍ ｡� ﾌ �20% losing wicked recognition 蔀 ､ � ｷ ﾚ ､ ｯ ｽ ﾐ ﾍ 隍 � ｡｣ ｡� ﾈ � ﾌ ｯ ､ ﾊ losing wicked recognition 蔀 ﾁ 犲 � ､ � ｲ ﾄ ﾇ ｽ ､ ﾋ ､ ｹ ､ � ｡｣ ｡� ｶ � ﾆ ｰ ｷ ﾏ ､ ﾎ 柴 wicked discarding serviing wine 勺 ､ � ﾋ ﾉ ､ ｰ ｡｣ L ｷ ｿ｡｢ FJ20 ﾍ ﾑ \17,000 Moisture 勺 morphism serviing wine 竺 ｡｢ 180 ﾍ ﾑ \17,000 R32 ｡｡GTR ﾍ ﾑ \17,000 Lacquer 偲 爵 person recognition moisture deer losing wicked recognition 蔀 slanted snipe lacquer \10,000 ｡� 宍 shaku actual 爵 discarding serviing wine recognition moisture deer ､ ﾈ ､ ﾎ ﾁ ﾈ ｹ 遉 ｻ ､ ﾋ ､ 隍 � ﾅ ｬ ﾅ ﾙ ､ ﾊ ｿﾌ ﾆ ｰ ｵ ﾛ ｼ � ､ � ｲ ﾄ ﾇ ｽ ､ ﾈ ､ ｷ ｡｢ drop 爵 moisture serviing wine 爵 copying explanation/releasing 灼 snipe ､ � ﾌ ｵ ﾂ ﾌ ､ ﾊ ､ ｯ ｶ � ﾆ ｰ ｷ ﾏ ､ ﾋ ﾅ ﾁ ､ ｨ ｰ ﾂ ﾄ 熙 ｷ ､ ｿﾁ � ､ 熙 ﾘ ﾆ ｳ ､ ｯ ｰ ﾙ ､ ﾎ ｶ ｯ ｲ ｽ copying explanation/releasing snipe 篠 ｡｣ The S30 ｡｢ S130 ｡｡ｶ ｯ ｲ ｽ it boils, 宍 爵 柴 ｭ ｡ｶ ｯ ｲ ｽ drop 爵 moisture serviing wine 爵 it boils, the 宍 爵 柴 ｡ﾊ PS30 ｡｢ S30 ｡｢ S130 ｡ﾋ ｺ ｸ ｱ ｦ 疾 recognition 柴 \16,000 ｭ ｢ ｶ ｯ ｲ ｽ corporation recognition wet process 爵 it boils, the 宍 爵 柴 ｡ﾊ PS30 ｡｢ S30 ｡｢ S130 ｡ﾋ \8,000 ｭ ｣ ｶ ｯ ｲ ｽ 偲 serviing wine discarding boiling 宍 爵 柴 ｡ﾊ S30 ｡ﾋ \12,000 ｡� ｽ wing ｵ ﾈ �1.5 ﾇ ﾜ ､ ﾋ ｹ ﾅ ﾅ ﾙ ﾀ ﾟ ﾄ 熙 ｷ ､ ｿｶ ｯ ｲ ｽ room serviing wine gossamer ｻ ﾈ ﾍ ﾑ ､ ﾇ drop 爵 moisture serviing wine 爵 ｡｢ 偲 serviing wine discarding ｡｢ corporation recognition wet 爵 ､ ﾎ ｿｶ ﾆ ｰ ､ � ﾅ ｬ ﾅ ﾙ ､ ﾋ ｵ ﾛ ｼ � ､ ﾇ ､ ｭ ｡｢ drop 爵 moisture serviing wine 爵 copying explanation/releasing 灼 snipe ､ � ﾌ ｵ ﾂ ﾌ ､ ﾊ ､ ｯ ｶ � ﾆ ｰ ｷ ﾏ ､ ﾋ ﾅ ﾁ ､ ｨ ､ � ｻ � ､ ｬ ｽ ﾐ ﾍ 隍 ﾞ ､ ｹ ｡ ｣ S30 ｡｢ S130 ｡｡71C corporation recognition wet 爵 person 爵 copying serviing wine snipe ｸ 衞 � seven discarding 疾 recognition 柴 person 爵 copying serviing wine snipe ｡ﾜ ｶ ｯ ｲ ｽ 宍 shaku actual 爵 discarding serviing wine recognition moisture deer set \19,800 ｡�71C corporation recognition wet 爵 ､ � ｴ ﾊ ﾃ ｱ ､ ﾋ ﾁ � ﾃ 螟 ﾇ ､ ｭ ｡｢ 71B ､ ﾇ ､ ﾏ ﾀ ｮ ､ ｷ ﾆ ﾀ ､ ﾊ ､ ､ ｽ ｼ ﾊ ｬ ､ ﾊ ﾂ ﾑ ｵ ﾗ ﾀ ｭ ､ ﾈ actual serviing wine discarding serviing wine 勺 room snipe 爵 ﾆ ﾃ ﾍ ｭ ､ ﾎ moisture discarding 柴 discarding ear snipe borrowing 爵 losing serviing wine ､ � ｼ ﾂ ｸ ｽ ｡ｪ ｢ ｨ ､ 隍 齊 ｽ gossamer snipe lacquer serviing wine ､ ﾊ moisture discarding 柴 discarding ear snipe borrowing 爵 losing serviing wine ､ � ﾆ ﾀ ､ � ､ ｿ､ 皃 ﾋ ｶ ｯ ｲ ｽ corporation recognition wet process 爵 it boils, the 宍 爵 柴 ､ ﾈ ､ ﾎ ﾊ ｻ ﾍ ﾑ ､ � ､ ｪ ｴ ｫ ､ 眦 ﾗ ､ ｷ ､ ﾞ ､ ｹ ｡｣ ｢ ｣ ｾ 蠏 ｭS30 ｡｢ S130 ｶ ｯ ｲ ｽ boiling 宍 爵 柴ｭ ｢ ｻ ｲ ｾ ﾈ ｡ｪ

Intake manifold

* In the midst of bargain sale! 5% OFF *

NISSAN

- ｴ ﾝ ｼ ﾞ ﾝ Model Specification L type 6 cylinder all car L20 - 30 Skyline Fair ready Z, Other things Lot system, Wire type commonness L type 6 cylinder all car L28 - 32 Skyline Fair ready Z, Other things 50 phi cab exclusive uses Big port type Lot system, wire type commonness L type 4 cylinder all the car L14, L16 and L18 Bluebird and other things A12, A14 and A15 ｻ ﾆ ｰ Elliptic port Twin cab specification car (The FF car you exclude) Item turn 1001 1002 1017 1006 Price \46,000 \50,000 \38,000 \36,000 - ｴ ﾝ ｼ ﾞ ﾝ Model Specification A12, A14 and A1 5 Circular port Single cab specification EGI car Z type (Z16, Z18 and Z20) E15 Langley, pulsar (E13 type installation failure) FJ20 Sill beer, Skyline RS Item turn 1011 1019 1028 Price \38,000 \46,000 \38,000

* The manifold itself, the insulator & the gasket and the マニガスケット, the fuel rubber hose, the turn buckle and the car classification part are included in price.

? V ? AOIL? @COOLER? @SYSTEM
? I? P? E? T? [? X? ^? B? G? E? P? O? C? J

? ? I? I? P? O? `? Q? O? OFF ?

? X? C? X? T? H? C? B? `? @? ^? C? V? T ? R? A ? C? ^? [? -? F? B? G? C? Gor? C? H ? G? N? X? G? C? H 10? I SS1-10 SS1-10CE ? 60,000 ? 65,000 13? I SS1-13 SS1-1C3E ? 69,000 ? 74,000 16? I SS1-16 SS1-1C6e ? 74,000 ? 82,000 19? I SS1-19 SS1-1C9e ? 79,000 ? 87,000 25? I SS1-25 SS1-2C5E ? 94,000 ? 100,000 34? I SS1-34 SS1-3C4E ? 120,000 ? 119,000 ? X? C? X? T? H? C? B? `? @? ^? C? V? U ? R? A ? C? ^? [? -? F? B? G? C? Gor? C? H ? G? N? X? G? C? H 10? I SS2-10 SS2-10CE ? 70,000 ? 75,000 13? I SS2-13 SS2-1C3E ? 79,000 ? 84,000 16? I SS2-16 SS2-1C6e ? 84,000 ? 91,000 19? I SS2-19 SS2-1C9e ? 89,000 ? 96,000 25? I SS2-25 SS2-2C5E ? 104,000 ? 110,000 34? I SS2-34 SS2-3C4E ? 123,000 ? 129,000 ? X? C? X? T? H? C? B? `? @? ^? C? V? V ? R? A ? C? ^? [? -? F? B? G? C? Gor? C? H ? G? N? X? G? C? H 10? I SS3-10 SS3-10CE ? 80,000 ? 85,000 13? I SS3-13 SS3-1C3E ? 89,000 ? 94,000 16? I SS3-16 SS3-1C6e ? 94,000 ? 101,000 19? I SS3-19 SS3-1C9e ? 99,000 ? 106,000 25? I SS3-25 SS3-2C5E ? 114,000 ? 120,000 34? I SS3-34 SS3-3C4E ? 132,000 ? 139,000

? X? C? X? O? C? P? X? @? ^? C? V? T ? R? A ? C? ^? [? -? F? B? G? C? Gor? C? H ? G? N? X? G? C? H 10? I SB1-10 SB1-10CE ? 79,000 ? 84,000 13? I SB1-13 SB1-1C3E ? 88,000 ? 93,000 16? I SB1-16 SB1-1C6e ? 93,000 ? 100,000 19? I SB1-19 SB1-1C9e ? 98,000 ? 105,000 25? I SB1-25 SB1-2C5E ? 113,000 ? 119,000 34? I SB1-34 SB1-3C4E ? 132,000 ? 138,000 ? X? C? X? O? C? P? X? @? ^? C? V? U ? R? A ? C? ^? [? -? F? B? G? C? Gor? C? H ? G? N? X? G? C? H 10? I SB2-10 SB2-10CE ? 89,000 ? 94,000 13? I SB2-13 SB2-1C3E ? 98,000 ? 103,000 16? I SB2-16 SB2-1C6e ? 103,000 ? 110,000 19? I SB2-19 SB2-1C9e ? 108,000 ? 115,000 25? I SB2-25 SB2-2C5E ? 123,000 ? 129,000 34? I SB2-34 SB2-3C4E ? 141,000 ? 148,000 ? X? C? X? O? C? P? X? @? ^? C? V? V ? R? A ? C? ^? [? -? F? B? G? C? Gor? C? H ? G? N? X? G? C? H 10? I SB3-10 SB3-10CE ? 99,000 ? 104,000 13? I SB3-13 SB3-1C3E ? 107,000 ? 112,000 16? I SB3-16 SB3-1C6e ? 112,000 ? 120,000 19? I SB3-19 SB3-1C9e ? 117,000 ? 125,000 25? I SB3-25 SB3-2C5E ? 132,000 ? 139,000 34? I SB3-34 SB3-3C4E ? 151,000 ? 157,000

? P? C? ^? A? G? W? ^? A? N? A? CENT? B ? Q? C? L? L? B? G? O? I ? Z? [? X? G? H ? E ? Z? [? X ? E ? I? C? U? B? N ? J? G? \? B? I? A KINOKUNI? P? [? C ? Q? CENT? B ? R? C? L? V? X? E? T? [? X? ^? B? G? T? Y? V? A? V? O? {? [? G? T? X? O? B ? I IMPORT? @PARTSNo17 KINOKUNI? P? [? C ? Q? L? CENT? B ? J? S? V? A? [? Y? I? B ? S? C? L? V? X? E? X? P? O? C? I? B

? X? AOIL? @BLOCK

? ? I? I? P? O? `? Q? O? OFF ?

? T? H? C? B? `? U? B? N? I? Z? ^? [? {? G? EO? O? T? J
? L? A510? B ? L? A502? B	? T? H? C? B? `? U? B? N ? IO-? O? E? X? ^? _? [? H? _? U? J ? I? ? T? C? Y ? I ? Z? ^? [? {? G O-? O? O? A ? Imm? J ? A? _? V? ^? [ ? I? J 509 M22? - 1.5p 70 NPT3/8 ? 7,500 510 3/4? H-16 70 NPT3/8 ? 6,900 511 M18? - 1.5p 70 NPT3/8 ? 7,500 512 13/16? H-16 ? _? U? I? O85? E? 70? J NPT3/8 ? 7,500 513 13/16? H-16 85? @? U? B? N? 47mm NPT3/8 ? 8,800 514 M20? - 1.5p ? _? U? I? O85? E? 70? J NPT3/8 ? 7,500 515 M18? - 1.5p 63 NPT3/8 ? 6,900 516 3/4? H-16 63 NPT3/8 ? 6,900 517 M20? - 1.5p 63 NPT3/8 ? 6,900
	? T? H? C? B? `? U? B? N? I ? T? [? X? ^? B? G? J ? I? ? T? C? Y ? I ? Z? ^? [? {? G O-? O? O? A ? Imm? J ? A? _? V? ^? [? I? J 502 3/4? H-16 ? _? U? I? O82? E? 70? J 7/8? H-14 ? 25,000

---

? O? C? P? X? U? B? N? IO-? O? T? J
? L? A1118/1119? B ? L? A1377? B	? O? C? P? X? U? B? N? I O-? O? @? X? ^? _? [? H? _? U? J ? I? ? T? C? Y ? I ? Z? ^? [? {? G O-? O? O? A ? Imm? J ? A? _? V? ^? [? I? J 1118 3/4? H-16 63 NPT1/2 ? 6,900 1119 M20? - 1.5p 63 NPT1/2 ? 6,900 1177 3/4? H-16 70 NPT1/2 ? 6,900 1277 13/16? H-16 ? _? U? I? O85? E? 70? J NPT1/2 ? 6,900 1577 M18? - 1.5p 70 NPT1/2 ? 6,900 1877 M22? - 1.5p 70 NPT1/2 ? 6,900 1977 M20? - 1.5p 70 NPT1/2 ? 6,900
	? O? C? P? X? U? B? N? I? P? U? B? N? J ? I? ? @? ? {? G? T? C? Y? Imm? J ? A? _? V? ^? [? I? J ? I 1377 ? V? {? [ V8? F56? `? F67 1/4? H-20? I6.3? J NPT1/2 ? 5,700 1477 ? V? {? [ V8? F68? ` 5/16? H-18? I7.9? J NPT1/2 ? 6,900

---

? I? C? G? G? }? E? G? U? P? B? G? I? Z? ^? [? {? G? T? J
? L? A2177? B ? L? A2277? B ? L? A2377? B	? I? C? G? G? }? E? G? U? P? B? G? I ? V? O? J ? I? ? T? C? Y ? I ? Z? ^? [? {? G O-? O? O? A? I? O? J ? A? _? V? ^? [? I? J 2177 3/4-16 58? `76 NPT1/2 ? 4,400 2277 3/4-16 64? `81 NPT1/2 ? 16,000 2477 13/16-16 60? `87 NPT1/2 ? 6,900 ? 2177? E2277? E2377? G? P? A? I? C? G? G? G? ^? E? J? B? T? N? I? J? G? P? CENT? B ? 2277? C? C? N? [? [? R? A? T? P? B
	? I? C? G? G? }? E? G? U? P? B? G? I ? _? U? J ? I? ? T? C? Y ? I ? Z? ^? [? {? G O-? O? O? A? I? O? J ? A? _? V? ^? [? I? J 2377 3/4-16 62? `80 NPT1/2 ? 14,400 ? P? [? A? I? C? ¬? I? I? 600? N? 4.5l? J? I? C? G? G? _? U? I? C? A? }? I? C? T? C? N? B
? S? I? U? B? N? E? A? _? V? ^? [? A KINOKUNI? P? [? C ? E ADAPTER? NPT? ? Q? L? CENT? B

? W? A OIL? @COOLER? @CORE

? ? I? I? P? O? `? Q? O? OFF ?

Carburetor-related part

SOLEX jet case Jet block driver * The main / air / pilot jet, the jewel box of the man who can receive jet block! * For jet block removal and re-installation of the SOLEX/WEBER widely it is the driver. - Snap-on make * This way is the reference picture. - Because width and thickness scramble viewing, the concave part is not damaged and it is relief! Value case \2,800 Value case \3,800 Synchronizer tester (cab balancer -) * Even in narrow space active 90 degree adapter attaching! It applies to the cab and cab ﾞ adjustment it is possible simply with the new mechanism where idling does not go down to either the cartridge. Because type 1 compared to 2, the adapter is the rubber make, use inside, a narrower E/G ﾙ ｰ ﾑ is possible. (4AG, B6 * & *) ﾀ ｲ ﾌ ﾟ Value case 1 XXYEN 12,000 * Taking theory to be attached ﾀ ｲ ﾌ ﾟ Value case 2 \25,000 Special value \21,000 * Taking theory to be attached MIKUNI genuine fuel level gauge Fuel level gauge * ミクニ genuine products! - SOLEX PHH40 - 50 Phi business * Case and taking theory attaching. - As for the fuel level from on the level gauge you just verify with visual inspection,! * You can use for the SOLEX, the WEBER and the OER cab ﾞ. Inserting the level gauge in the hole which pulled out jet block, the groove of level gauge top doing the plug with the finger, pulling gently and pulling out, reading the gasoline level inside the level gauge with the graduation the sufficient simplicity which it measures one touch! - Color: Blue alumite * Taking theory for side draft to attach SI way Value case Plastic type \4,200 SI way Value case Glass tube type \4,000 * When description above, adjusting the fuel level, burning pressure the normality (0.25 - the 0.35kg/c? After verifying whether the U) is, please work. * Adjustment of burning pressure description below, the fuel regulator is necessary. * When burning pressure is verified, for inside the engine compartment: 40 Phi fuel pressure indicators , for interior: We recommend 60 Phi fuel pressure indicators. Large capacity for cab フューエルレギュレター フューエルレギュレター for cab (For low pressure) Adapters for 40 Phi fuel pressure indicator * The large capacity type which it can correspond to the mechanic pump and the fuel pump for injection. The necessity because you make adjust and make stabilize fuel pressure of the cab and! - Burning pressure of fuel pump for injection 0.3kg/? It lowers to p 2. * At the time of injection pump use, when the return pipe is the 8mm, please use this large capacity type. * When the return pipe is below the 8mm, changing is necessary in the below-mentioned 8mm copper pipe. * As for installation reference example this way click - As for standard piping diagram this way click - As for circulating type piping diagram this way click * With while it is the fuel pump for injection is used when the carburetor it is installed. - For low pressure (LO) 1kg/? Burning pressure of p 2 0.025 - It lowers to the 0.03mpa. * At the time of injection pump use, because the return pipe (the 4mm) it is thin the Toyota car in (the 4AG, the 13TEU and the 2TGEU et cetera), please use one for this low pressure. * When (correspondence) however it exceeds the 160ps to the 160ps, please change the return pipe in the 8mm copper pipe, use large capacity type. * As for the commodity, in regard to piping hose joint 1 place has become the メクラ. - As for piping diagram for low pressure this way click * It is the adapter which is necessary to the case where 40 Phi fuel pressure indicators are installed directly in the following フューエルレギュレター. - Material: Stainless steel make - Seal tape attachment. * You install description above and it is example. * The above-mentioned 40 Phi fuel pressure indicators, the ﾌ ｭ ｰ ｴ ﾙ ﾚ ｷ ﾞ ｭ ﾚ ｰ ﾀ ｰ has not been attached. Value case \16,000 Value case \16,000 Value case \500 * In addition, as for fuel regulator & 40 Phi fuel pressure indicators this way click * * As for various union parts for piping this way click * Aluminum collector tank Fuel pump controller SI way Value case 2 ﾎ ｰ ｽ oral ﾀ ｲ ﾌ ﾟ under upper 2 (angular type) \15,000 1 ﾎ ｰ ｽ oral ﾀ ｲ ﾌ ﾟ under upper 3 (cylinder) \14,500 2 ﾎ ｰ ｽ oral ﾀ ｲ ﾌ ﾟ under upper 4 (cylinder) \19,500 * Be able to turn optionally and be able to set the additional ﾌ ｭ - the ON/OFF of the ｴ ﾙ ﾎ ﾟ ﾝ ﾌ ﾟ, according to travelling purpose, the ﾄ ﾞ ﾛ ｯ ﾌ ﾟ of burning pressure is prevented. Value case \15,800 ニスモフューエルポンプ Large capacity fuel pump SI way Value case Emission quantitative L amount 1.3l/ amount Largest emission pressure 0.45kg/? P 2 XXYEN 11,500 ﾊ ﾟ ｰ ﾂ for exchange Value case ﾌ ｨ ﾙ ﾀ ｰ XXYEN 1,000 (Entrance 12 phi exit 8 phi substance 54 phi) * As for installation reference example this way click SI way Value case Emission quantity 2.2l/ amount (0.3kg/? O'clock of p 2) XXYEN 31,900 ｵ ﾌ ﾟ ｼ ｮ ﾝ Value case ﾌ ﾞ ﾗ ｹ ｯ ﾄ XXYEN 1,520 ミツバフューエルポンプ Ignition timing revision unit for NA8C cab car * ユーノスロードスター (1800) NA8C cab equipped car * Ignition timing prevents the fact that advanced angle it stops doing with removing air flow meter. - It is the sufficient simple work method of installation removing the connector which is connected to air flow meter, referring to the figure of taking theory, connecting with the electro- tap. Value case \15,000 Value case \10,000 8? O copper pipe (3 m winding) Fuel hose (stainless steel mesh # 6) With the copper ﾊ ﾟ ｲ ﾌ ﾟ for fuel piping because of the ﾅ ﾏ ｼ material, being to bend pliantly very much convenience. Value case \3,000 * As for installation reference example this way click ｻ ｲ ｽ ﾞ Value case 1m \5,000 Trade name Value case ｴ ｺ ﾉ ﾊ ﾞ ﾝ ﾄ ﾞ #6 \850 * Color: Blue / lead selection 8? O fuel rubber hose 3 connected fuel pipes for L6 ｻ ｲ ｽ ﾞ Value case 1m \1,000 Trade name Value case ｽ ﾃ ﾝ ﾊ ﾞ ﾝ ﾄ ﾞ \250 Value case \4,500 * As for installation reference example this way click L type WEBER50 phi business ｱ ﾙ ﾐ ﾋ ｰ ﾄ ﾌ ﾟ ﾚ ｰ ﾄ L type 40 - 45 phi business ｱ ﾙ ﾐ ﾋ ｰ ﾄ ﾌ ﾟ ﾚ ｰ ﾄ L type 50 phi business ｱ ﾙ ﾐ ﾋ ｰ ﾄ ﾌ ﾟ ﾚ ｰ ﾄ Value case \6,000 Value case \5,000 Value case \7,000 * 44 Phi, 50 Phi being common, you can use. * As for installation reference example this way click Magnetic attaching fuel file tar * With the ﾌ ｨ ﾙ ﾀ ｰ of the disassembly cleaning possible ｶ ﾞ ﾗ ｽ tube ﾀ ｲ ﾌ ﾟ, the ﾏ ｸ ﾞ ﾈ ｯ ﾄ which is trained inside the ｷ ｬ ｯ ﾁ does the ｻ ﾋ ﾞ and the iron powder. * It is the for inside diameter 8mm fuel hose. * The stay for filter fixing which in the picture is, also the band is included. Value case \3,800 Single item part for exchange Value case Spare filter & gasket set XXYEN 450 Stay set for filter fixing XXYEN 600

Funnel / air cleaner part

40 - 50 phi business genuine air funnels (SOLEX/WEBER common use)
		Trade item name Aperture ｻ ｲ ｽ ﾞ (? O) Item turn Value case Air funnel (SOLEX genuine products) 40 phi 25 N101, 193 \2,100 40 phi 50 N101, 157 \5,250 40 phi 75 N101, 157 \6,000 44 phi 50 N101, 240 \4,800 44 phi 75 N101, 270 \6,000 50 phi 50 N101, 322 \9,000
40 - 50 phi business cirque funnels (SOLEX/WEBER common use)
* Description above is the installation image picture.
Trade item name Aperture ｻ ｲ ｽ ﾞ (? O) Value case Cirque funnel 40 phi Picture left side 45mm \4,500 Picture right side 70mm \5,000 Trade item name Aperture ｻ ｲ ｽ ﾞ (? O) Value case Cirque funnel 44 phi Picture left side 45mm \5,000 Picture right side 70mm \5,500 Trade item name Aperture ｻ ｲ ｽ ﾞ (? O) / quantity Value case Cirque funnel 4 4 phi 75mm2 set \16,000 Cirque funnel WEBER 50 phi 75mm 2 set \19,000 Trade item name Aperture Quantity Value case Cirque funnel IDA 48 phi 2 set \19,000

---

40 phi business net attaching funnels (SOLEX/WEBER common use)

* Material: Brass make / chrome plating finish. * Also the funnel ring has belonged to the one for WEBER. (The bench lily - it springs out, for prevention) * The net section has protruded approximately 20mm. Trade item name Aperture ｻ ｲ ｽ ﾞ (? O) Value case Net attaching funnel 40 phi 30 \3,000 40 phi 50 \3,000 40 phi 75 \3,500

Funnel ring for WEBER40or 45 phi DCOE

* Description above is the installation image picture. * It can install the funnel the other than WEBER genuine with attaching the funnel ring, also the difference in level is gone. Trade item name Type system Value case (1) Funnel ring 40or45 phi DCOE \1,000 * 40 Phi or45 Phi empty selections. * Description above is the installation image picture.

---

Angular type air cleaner (SOLEX, WEBER common use)
Trade item name ï½» ï½² ï½½ ﾞ (thickness) Oral diameter (Phi) Suitable application/response Value case Angular type air cleaner 45mm thick 45mm 48 Phi ×2 holes SOLEX/WEBER common use \3,500 Filter for angular type air cleaner exchange 45mm * Filter single unit for exchange of above-mentioned commodity \1,800
Trade item name ï½» ï½² ï½½ ﾞ (thickness) Oral diameter (Phi) Suitable application/response Value case Angular type air cleaner 80mm thick 80mm 48 Phi ×2 holes SOLEX/WEBER common use \4,100 Filter for angular type air cleaner exchange 80mm * Filter single unit for exchange of above-mentioned commodity \2,400

* The above-mentioned commodity is the SOLEX/WEBER/OER common, but only side draft is corresponding.

* The down-draft cab (the WEBER40 - 48 Phi IDA/IDF) and the like the carburetor where funnel installation pitch is different is installation failure.

---

For time of WEBER 40DCOE angular type air cleaner installing collar head funnel ring
* Description above is the installation image picture.	* Collar head funnel ring (rubber packing attaching)
Trade item name Suitable application/response Value case (1) Collar head funnel ring   WEBER40 Phi DCOE \2,000

Intake manifold part

Adjustable joint (limited item) Trade item name Preparation to think Value case Adjustable L6 joint set As soon as being gone because it becomes end, we ask stock verification by all means. XXYEN 5,000 Turn buckle (ﾌ ﾞ ï¾— ｯ ｸ) Turn buckle (ｺ ﾞ ï½° ï¾™ ﾄ ﾞ) Turn buckle (piece pyro) * With the after part which has belonged to intake manifold set standard the part of black does with the plastic. * The part of the gold the crack is difficult to crack with thin Chu make, is. * If as for the SOLEX because the part of the lever does not come off, it is this piece pyro, volt/bolt it can turn on. * It meaning that the one side becomes the opposite screw, while it is attached the length adjustment is possible. Size Value case Standard XXYEN 1,800 Long type XXYEN 1,900 Size Value case Standard XXYEN 2,600 Long type XXYEN 2,700 Value case XXYEN 2,800 Turn buckle (both pyro) Pushing lever NEW type Pushing lever old type * It meaning that abnormal play is little, you can cancel the alignment of the cab and you take accurately, the worry which comes off with sport travelling. * It meaning that the one side becomes the opposite screw, while it is attached the length adjustment is possible. * The new type which is strong in looseness. It can lock securely with volt/bolt and the nut. Material: Aluminum make: Blue alumite to finish * 1 (stain bar axial diameter: 8 phi or10 phi selections) * It does with the after part which has belonged to intake manifold set standard . * 1 (stain bar axial diameter: 8 phi or10 phi selections) Value case XXYEN 3,000 Value case XXYEN 2,200 Value case XXYEN 1,800 Various wires to receive Wire for A type intake manifold to receive Adjustment lever * There is a type with the bracket in order to catch the wire depending upon engine type. * It is the wire receiving for the Sunny A type intake manifold. * Manifold item turn: 1006 and 1011 * When fine adjusting the throttle opening by the pushing lever, necessity. * Type? @or? A selection. * Stain bar axial diameter 10 phi business * Component of car classification part for intake manifold set. * In order form, intake manifold item turn of use clearly writing. Value case XXYEN 1 and 200 Value case XXYEN 2 and 500 Value case XXYEN 1 and 200 Return spring Resetting lever E ring * There is a dexterity and the left winding with the spring ﾞ for the accelerator return of the linkage depending upon the type of the engine. Picture left side: For L6, picture right side: 4 cylinder cars * The lever which adjusts the strength of the return spring. * 1 (stain bar axial diameter: 8 phi or10 phi selections) * You use for the lock of the stain bar. Value case XXYEN 500 Value case XXYEN 1,000 Value case XXYEN 80 オオギレバー The intake manifold wire for Mitsubishi to receive * NISSAN and Toyota, Matsuda, HONDA car * 1 (stain bar axial diameter: 8 phi or10 phi selections) * 2 ( wire installation hole diameter 6/7/8 phi selection) * Matsuda car (rotary) business * Mitsubishi car (4g52, 4g32 and G54B) business * Manifold item turn: 1004, 1016 and 1034 * Applying the ﾜ ï½² ï¾” ï½°, there is a type with the ﾚ ﾊ ﾞ ï½° which operates the ï½½ ï¾› ｯ ﾄ ï¾™ depending upon ï½´ ﾝ ï½¼ ﾞ ﾝ type. * Component of car classification part for intake manifold set. * In order form, intake manifold item turn of use clearly writing. Value case XXYEN 3,500 Value case XXYEN 1,900 The wire receiving lever for Mitsubishi it is * The lever of the above-mentioned picture is excluded, (only the point) Value case XXYEN 1,500 Wire holding down attaching オオギレバー オオギレバー for MINI Various closing covers * Passing through the accelerator wire point to the hole, the screw it can stop. * 1 (stain bar axial diameter: 8 phi or10 phi selections) * Mini- Kuu per private オオギレバー. * Passing through the accelerator wire point to the hole, the screw it can stop. * Component of car classification part for intake manifold set. * In order form, intake manifold item turn of use clearly writing. Value case XXYEN 3,500 Value case XXYEN 3,000 Number Value case ? @? A XXYEN 1,000 ? B XXYEN 1,700 ? C? D XXYEN 1,500 4k マニ installation volt/bolt Ball joint Teflon bush * It is volt/bolt for 4k intake manifold installation. * The part which has been used for the point of the pushing lever. * You use for the sliding section of the stain bar. In intake manifold 1 unit 2 necessity. * Stain bar axial diameter 10 phi business Value case (1) XXYEN 1,000 Value case XXYEN 530 Value case XXYEN 700 インジェクターメクラ Various メクラ Various EGI plugs * With the after part which has belonged to intake manifold set standard, it is the for メクラ of the injector installation section. * Component of car classification part for intake manifold set. * In order form, intake manifold item turn of use clearly writing. * With the after part which has belonged to intake manifold set standard, it is the part for the メクラ of classified by various engines. * Component of car classification part for intake manifold set. * In order form, intake manifold item turn of use clearly writing. * With the after part which has belonged to intake manifold set standard, it is the part for the EGI メクラ of classified by various engines. * Component of car classification part for intake manifold set. * In order form, intake manifold item turn of use clearly writing. Quantity Value case 4 1set XXYEN 4,500 1 1set XXYEN 1,200 Size (from the picture left) Value case 16 Phi XXYEN 550 14 Phi XXYEN 550 8 Phi XXYEN 350 6 Phi XXYEN 350 Picture No Value case (each) ? @ ? A ? B ? C XXYEN 1,800 L6 joint set Letter joint single unit of コ Water outlet * When with the component of the intake manifold kit driving the linkage ﾞ with the rod ﾞ, it is necessary. * Component of car classification part for intake manifold set. * Stain bar axial diameter 8 Phi, the letter joint inserting section of the コ is the for main axial diameter 10 Phi stain bar. * Joint part of stain bar. * It is the for letter joint inserting section main axial diameter 10 Phi stain bar of the コ. * In 4AG supplies turn 1046 intake manifold and genuine intake manifold specification possibility. Also the genuine water temperature sensor, the electromotive fan sensor and the mechanical cable type Coolant temperature sensor are enabled. * In item turn 1033 intake manifold use failure. Value case XXYEN 7,000 Value case XXYEN 2,000 Value case XXYEN 9,800 * 1, the part which is attached to the stain bar with the above-mentioned commodity stain bar axial diameter 8 phi or10 phi clearly writing. SOLEX/WEBER/OER common insulator & gasket type 1 - It is detailed size of the insulator. - Installation pitch for the side draft cab also type 1 OR 2 is the same. * When the following picture is clicked, it expands. Trade item name ï½» ï½² ï½½ ﾞ Value case ﾍ ﾞ ï½° ｸ ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° & ﾊ ﾟ ｯ ï½· ﾝ ï½¾ ｯ ﾄ ï¾€ ï½² ﾌ ﾟ 1 40 - 45 phi common (Aperture 45 Phi ×2 hole) XXYEN 1,400 * It is price of the above-mentioned ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° and the ﾊ ﾟ ｯ ï½· ﾝ ï½¾ ｯ ﾄ. * The WEBER corresponds to the DCOE. Trade item name ï½» ï½² ï½½ ﾞ Value case ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° ﾊ ﾟ ｯ ï½· ﾝ ï¾€ ï½² ﾌ ﾟ 1 1 basis (2 ï½¾ ｯ ﾄ) 40 - 45 phi common (Aperture 45 Phi ×2 hole) XXYEN 800 * It is price of the above-mentioned ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° ﾊ ﾟ ｯ ï½· ﾝ single item. * The WEBER corresponds to the DCOE. In addition it is failure. Trade item name ï½» ï½² ï½½ ﾞ Value case ﾍ ﾞ ï½° ｸ ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° & ﾊ ﾟ ｯ ï½· ﾝ ï½¾ ｯ ﾄ ï¾€ ï½² ﾌ ﾟ 1 50 phi XXYEN 3,000 * It is price of the above-mentioned ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° and the ﾊ ﾟ ｯ ï½· ﾝ ï½¾ ｯ ﾄ. * The WEBER corresponds to the DCOE. Trade item name ï½» ï½² ï½½ ﾞ Value case WEBER IDA ﾍ ﾞ ï½° ｸ ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° & ﾊ ﾟ ｯ ï½· ﾝ ï½¾ ｯ ﾄ WEBER IDA (Aperture 50 Phi ×1 hole) XXYEN 1,400 * It is price of the above-mentioned ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° and the ﾊ ﾟ ｯ ï½· ﾝ ï½¾ ｯ ﾄ. * It is installation failure in the WEBER DCOE. SOLEX/WEBER/OER common insulator & gasket type 2 Trade item name ï½» ï½² ï½½ ﾞ Value case ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° single unit ï¾€ ï½² ﾌ ﾟ 2 40 phi XXYEN 2,200 45 phi 50 phi XXYEN 2,500 ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° ﾊ ﾟ ｯ ï½· ﾝ ï¾€ ï½² ﾌ ﾟ 2 1 basis (2 ï½¾ ｯ ﾄ) 40, 45 and 50 phi XXYEN 600 * It is the above-mentioned ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° and ﾊ ﾟ ｯ ï½· ﾝ individual price. * In WEBER the case of use, ï½½ ï¾€ ï½° ï¾€ ï½° section escaping processing necessity! * The case of order, ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° & ﾊ ﾟ ｯ ï½· ﾝ ï½¾ ｯ ﾄ or Single unit basket communication. * Description above ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° single unit. (There is 40, 45 and 50 Phi business each size) * The WEBER corresponds to the DCOE. In addition it is failure. * Description above ï½² ﾝ ï½¼ ï½­ ﾚ ï½° ï¾€ ï½° ﾊ ﾟ ｯ ï½· ﾝ. (There is 40, 45 and 50 Phi business each size) * The WEBER corresponds to the DCOE. In addition it is failure. Manifold gasket for L6 Trade item name / size Value case For L28 normal port (IN36 phi) \1,700 For L28 Bick port (IN41.5 phi) \1,700 For L28 ring attaching Bick port (IN39 phi) \3,600 * Because we handle also that other car classification manifold gasket, please inquire with ease. * - It is single item sale yes of the car classification component of intake manifold set! * Item turn of the intake manifold / desired item name and the like upper communication of clearly writing in order form. - By all means vehicle inspection proof of order form, the statement item column / the car 輌 & entry to the tuning detailed contents column.

WEBER carburetor

* WEBER carburetor itself

* In the midst of 45 Phi DCOE 9 bargain sales! 10% OFF *

WEBER 45 Phi carburetor ASSY
Type Value case Special value DCOE 9 XXYEN 58 and 000 XXYEN 52 and 200
WEBER 50 Phi carburetor ASSY	WEBER 48 Phi down-draft Carburetor ASSY
Type Value case DCO 1 /SP XXYEN 82 and 000	Type Value case IDF 7 ASK

* Above-mentioned ASSY other types please inquire because also the procurement difficult com

Rammer foot & gasket for race/lace

Model Engine type DRAG isometric ｽ ﾁ ｰ ﾙ ﾀ ｺ foot DRAG isometric ｽ ﾃ ﾝ ﾀ ｺ foot DRAG 6 - 1 ﾀ ｺ foot Preparation to think 45 phi 48 phi 45 phi 48 phi 48 phi S 30, S 31 L20 - L28 \90,000 \10,500 \190,000 \210,000 \280,000 As for the left handwheel 45 phi only. As for 6-1 ﾏ ﾌ ﾗ ｰ process necessity. S130 L20 - L28 \90,000 \10,500 \190,000 \210,000 \280,000 The left handwheel failure. As for 6-1 ﾎ ﾞ ﾃ ﾞ ｨ and ﾏ ﾌ ﾗ ｰ process necessity. GC10 L20 - L28 \90,000 \10,500 \190,000 \210,000 - - GC110 L20 - L28 \90,000 \10,500 \190,000 \210,000 - - GC210 L20 - L28 \90,000 \10,500 \190,000 \210,000 - - HR30 L20 - L28 \90,000 \10,500 \190,000 \210,000 - - DR30 FJ20E - - \140,000 - - 4-1 gathering diameter 75 phi. 510 L14 - L18 \80,000 - \140,000 - - 4-1 gathering diameter 60 phi. TE27 2TG \80,000 - \140,000 - - 4-1 gathering diameter 60 phi. ﾋ ﾞ ｯ ｸ ﾎ ﾟ ｰ ﾄ ﾌ ﾗ ﾝ ｼ ﾞ use ｡ TA22 2TG \80,000 - \140,000 - - 4-1 gathering diameter 60 phi. ﾋ ﾞ ｯ ｸ ﾎ ﾟ ｰ ﾄ ﾌ ﾗ ﾝ ｼ ﾞ use ｡

- ï½½ ﾁ ï½° ï¾™ bend ﾊ ﾟ ï½² ﾌ ﾟ ï½½ ﾄ ﾚ ï½° ﾄ ﾃ ï½° ï¾™ ﾊ ﾟ ï½² ﾌ ﾟ ï½² ﾝ ï¾… ï½° ï½» ï½² ﾚ ﾝ ï½» ï½° ï¾’ ï¾€ ï¾™ ﾏ ﾌ ï¾— ï½° ｶ ﾞ ï½½ ï½¹ ｯ ﾄ Heatproof ï½½ ﾌ ﾟ ﾚ ï½° (30,45,60,90°) (ï½½ ﾁ ï½° ï¾™ ﾊ ﾟ ï½² ﾌ ﾟ) (ï¾’ ｯ ï½· finish) (Sound arresting machine for ﾃ ï½° ï¾™ ﾊ ﾟ ï½² ﾌ ﾟ) Gold coin type Triangle Glasses (ï¾€ ｺ foot, for ﾏ ﾌ ï¾— ï½°) 42 phi 30 - 90° \1,800 1m \1,400 - - - - - ﾌ ﾞ ï¾— ｯ ｸ \2,000 50 phi 30 - 90° \2,000 1m \1,600 230? O \2,000 - \700 \700 \1,000 ï½¼ ï¾™ ﾊ ﾞ ï½° \2,500 60 phi 30 - 90° \2,500 1m \2,000 230? O \2,500 - \800 \800 \1,200 ﾚ ｯ ﾄ ﾞ \2,000 75 phi 30 - 90° \3,000 1m \2,400 230? O \3,000 70 phi ×110 \8,000 \1,200 \1,400 - ﾎ ﾜ ï½² ﾄ \2,000 80 phi 30 - 90° \3,500 1m \3,600 230? O \3,500 76.5 Phi ×110 \8,500 \1,400 - - ﾌ ﾞ ï¾™ ï½° \2,000 90 phi Only 90° \12,000 1m \5,000 230? O \4,000 84 phi ×110 \9,000 \2,000 - - ｶ ﾞ ﾝ ï¾’ ï¾€ \2,500 100 phi Only 90° \15,000 1m \9,000 230? O \4,500 96 phi ×110 \9,500 - \2,500 - ｶ ﾞ ﾝ ï¾’ ï¾€ ï¾— ï½² ﾄ \2,500

Electrical type part

Starter

Alternator -

* The case where the ｵ ﾙ ﾀ ﾈ ｰ ﾀ ｰ which is not the ﾚ ｷ ﾞ ｭ ﾚ ｰ ﾀ ｰ internal organs is modified in the ｵ ﾙ ﾀ ﾈ ｰ ﾀ ｰ of the IC ﾋ ﾞ

Meter

Tachometer < SI way > Type Electric type (indicator light ﾟ built-in) Indicatory range 0 - 1.000rpm Face plate color Black Illumination Blue Major diameter 110 phi Trade item name Value case KAMEARI tachometer \28,000 < Optional item > Trade item name Size Value case Meter panel 110 phi business \2,000 Option * Being something which informs about the shift point or the オーバーレブポイント at the time of the shift rise ﾟ with two light/write illuminations of the green * lead ﾞ it does. Combination of the controller being similar, use. * There is setting of 4 cylinders and 6 cylinders. The car interior compared to setting can do the green light/write and the red light optionally with each volume. * Not looking at the shift light/write, it informs about red zone with buzzer sound. Trade item name Value case Shift light/write \6,800 Trade item name Value case Shift light/write controller \10,000 Trade item name Value case Shift light/write buzzer \2,800 Fuel pressure indicator < SI way > Type Mechanical cable type Bourdon type Indicatory range 0 - 0.8kg/c? U Face plate color From black OR dark blue selection Illumination Blue Major diameter 60 phi Trade item name Color Value case KAMEARI fuel pressure indicator Blue \11,000 Black * The case of installation, the strengthening stain mesh hose of the sale classified by description below is necessary. < Optional item > Trade item name Size / specification Value case Strengthening stain mesh hose 1.5 m \4,500 2.0 m \5,000 3 one joints Inserting between the fuel hose, it is the joint in order to install the above-mentioned stain mesh hose. \1,400 Meter panel 60 phi business \1,000 Oil temperature gauge < Specification > Type Mechanical cable type Bourdon type Indicatory range 50 - 130 DEGC Face plate color ﾌ ﾞ ï¾— ｯ ｸ Illumination ﾌ ﾞ ï¾™ ï½° Major diameter 52 phi Sensor M16×1.5 (length 2m) Trade item name Value case KAMEARI oil temperature gauge \12,000 < Optional item > Trade item name ï½» ï½² ï½½ ﾞ Value case Meter panel 1 hole 52 phi \500 Meter panel 2 hole 52 phi \600 Meter panel 3 hole 52 phi \700 Oil pressure gauge < SI way > Type Mechanical cable type Bourdon type Indicatory range 0 - 10kg/c? U Face plate color ﾌ ﾞ ï¾— ｯ ｸ Illumination ﾌ ﾞ ï¾™ ï½° Major diameter 52 phi Trade item name Value case KAMEARI oil pressure gauge \8,000 * The case of installation, the strengthening flexible pipe of the sale classified by description below is necessary. < Optional item > Trade item name ï½» ï½² ï½½ ﾞ Value case Strengthening flexible pipe 1.5 m \4,000 2.0 m \4,500 Meter panel 1 hole 52 phi \500 Meter panel 2 hole 52 phi \600 Meter panel 3 hole 52 phi \700 Temperature gauge < SI way > Type Mechanical cable type Bourdon type Indicatory range 40 - 115 DEGC Face plate color ﾌ ﾞ ï¾— ｯ ｸ Illumination ﾌ ﾞ ï¾™ ï½° Major diameter 52 phi Sensor M16×1.5 (length 2m) Trade item name Value case KAMEARI temperature gauge \12,000 < Optional item > Trade item name ï½» ï½² ï½½ ﾞ Value case Meter panel 1 hole 52 phi \500 Meter panel 2 hole 52 phi \600 Meter panel 3 hole 52 phi \700 Sensor adapter * The adapter which is used the occasion which does not use oil block and it installs the temperature sensor making use of the hole of standard! Trade item name SI way Item turn Value case Oil pan welding General purpose OT-005 \750 Oil pan drain L type and A type OT-007 \800 Water temperature sensor installation WT-00C1b \800 Copper washer For sensor (every time exchange part) - \120 メクラネジ Oil block oil temperature gauge sensor - \700 Oil block * Oil temperature, sensor removal & for oil cooler for oil pressure! Trade item name Adaptation ï½´ ﾝ ï½¼ ﾞ ﾝ type Item turn Value case Oil block L type, 2TG and 4k CONT \9,800 FJ20 CONTL \13,500 A type and CA CONTS \14,000 3 connected carbon panels Trade item name Specification Value case 3 connected carbon panels S30 and S31 \4,800 52 phi ×3 reams (for ï½¾ ﾝ ï¾€ ï½° ｺ ﾝ ｿ ï½° ï¾™) Carbon make